PT5300 |
25
•
1080i/29.97
•
1080i/25
•
720p/60
•
720p/59.94
•
720p/50
•
720p/30
•
720p/29.97
•
720p/25
•
720p/24
•
720p/23.9
Note:
When changing from one format to the other you must check the timing adjustment, as the timing in one format
may NOT be valid in a different format. If the timing is not valid then it will be reset to +0,+0,+0.
To change the delay/advance timing for the TLS1 output, select TIMING.
2NDMNU:../TLS1/TIMING, edit delay
E
F:<+1> H:+008 T: +00006.7 SAVE ESC
Operation:
• Use the and buttons to select F, H, or T
• Then use the
and
buttons to change the setting. Changes to the timing are instantaneous, i.e. any
changes are reflected immediately in the output signal.
• When the desired setting appears in the display, move the cursor to SAVE and press E to change the setting.
The timing can be adjusted by coarse or fine adjustment parameters. The coarsest adjustment is field (F) the finest is
time (T), and line (H) is lines. The T value is in nanoseconds.
• The T value can be changed by using the
and
buttons to adjust the smallest step for the adjustment,
but a faster method is to press E when the cursor is on the T value. This opens an editor in which each of the
time digits can be changed using the
and
buttons.
• Positions are Selected by using the
and
buttons.
• To exit the editor, press E
• When the desired delay setting appears in the display, move the cursor to SAVE and press E
• If no changes are desired, move the cursor to ESC and press
.
Leaving the function takes you back to the TRI-LEVEL/TLS1 submenu.
4.7.3 Menu: GENLOCK
Содержание PT5300
Страница 6: ......
Страница 59: ...PT5300 53 4 9 Menu Tree Figure 7 PT5300 Menu tree ...
