©2013 DJI Innovations. All Rights Reserved.
14 |
[6]Flight parameters
If the connection between the camera and the NAZA is ok, these “N/A”s should be meaningful digits
[7]
SD Card Status
Highlighted when a valid SD card is inserted, otherwise, grayed out.
[8]
Wi-Fi Signal Intensity
The Camera is connected to the Range Extender correctly and Wi-Fi is working normally.
[9]
Aircraft Battery Level
3 grids: > 11.80V
2 grids: 11.30V to 11.80V
1 grid: 11.20V to 11.30V (should fly back)
0 grid: <= 11.20V (should land immediately)
[10]
Aircraft GPS status
Highlighted when more than 6 satellites are found, otherwise, grayed out.
[11]Remained shots
It is calculated based on the current selected photo size. Zero if SD card is not inserted
[12]
Camera Capture Button
Capture Button is disabled during the process of recording.
[13]
Camera Record Button
A red dot
blinks when the camera is recording, and the time elapsed
is displayed on the top
right corner of the preview screen.
[14]
Hide or show camera settings
Click to enter camera settings, and click again to exit.
[15] Hide or show flight parameters.
Click to hide flight parameters, and click again to show flight parameters.
Camera Page--Camera Settings
[17]
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10
]
[11
]