©2013 DJI Innovations. All Rights Reserved.
7 |
Mode).
GPS ATTI. ATTI. ATTI.
(
Manual
or
Failsafe is
selectable
in
software.)
3-position switch (S1) on the Transmitter for mode control.
Only after Compass Module connection and Compass
calibration, GPS ATTI. Mode is available. Otherwise, all switch
positions are for ATTI. Mode. Pay attention because the GPS
ATTI. Mode is dependent on the number of GPS satellites
acquired by the main controller. Refer to the LED Indicator.
When GPS signal has been lost for 3s, system enters ATTI.
Mode automatically. You can enable the Manual Mode or Fail
Safe (also known as One-key Go-home) in the assistant
software->Basic->R/C->Control Mode.
OFF Course Lock Home Lock
3-position switch (S2) on the Transmitter for Intelligent
Orientation Control (IOC). Set the switch to OFF in basic flight.
This function is defaulted to off.
If you want to use this
function refer to the advanced manual, and enable it in the
assistant software. Use IOC when you are familiar with basic
flight.
CameraRecognition
[1]Power Switch
(on the back of the camera)
Three stops:
(1)
OFF – Powered off
(2)
CAM ON – Power on, Wi-Fi off
(3)
WIFI ON –Power and Wi-Fi are both on
[2]LED Indicator
(on the back of the camera)
LED
WIFI
CAMERA
Solid on
OFF
Power On; Idle State
[2]
[1]
[3]
[4]
[5]
