7
QUICK SETUP DIAGRAM
Study this setup diagram. Make sure all faders are at "zero" and all devices are off. First, connect all input
sources and processors. Next, connect your microphone and monitor headphones. Finally, connect the
stereo outputs to the power amplifier(s) and/or audio receivers such as tape decks. Plug your mixer into AC
power. Now you are ready to switch everything on.
IMPORTANT: Always switch on your audio input sources such as turntables or CD players first, then your
mixer, and finally any amplifiers. When turning off, always reverse this operation by turning off amplifiers,
then your mixer, and then input devices.
SPECIFICATIONS
Power source
AC 230V~50Hz / AC 120V~ 60Hz
Fuse
T1AL/250V / T1AL/125V (5x20mm)
Power consumption
0W/ 28 W (off/ max)
Input sensitivity 1,58V
LINE
14,5mV
DJ
MIC
15,9mV
MIC
CH1
16,7mV
PHONO
Input impedance
5kohms
LINE
52.4kohms
DJ
MIC
10.4kohms
MIC
CH1
45.6kohms
PHONO
Output voltage
6,6V RMS @ 10kohms
Output impedance
550 ohms
Frequency response
20Hz – 20kHz (-1.5dB)
THD <0.07%
S/N ratio
>77dB
Channel separation
>65dB
Talkover -15dB
Dimensions
320 (H) x 355 (W) x 110 (D) mm (Rack mount depth 85mm)
Weight 4.4kg
