Dixon DX152, Руководство оператора

Страница: 30 / 68

OPeRaTION
30
8066-007
Turn to the START position
IMPORTANT INFORMATION
Do not run the starter for more than 5 seconds
each time. If the engine does not start, wait
about 10 seconds before retrying.
8. Press in and turn the ignition key to the start
position.
For cold starts, the choke control should be pulled
out to its extent. Push the choke in after engine
starts.
9. When the engine starts, immediately release the
ignition key back to the run position. Push the
choke control in gradually when the engine has
started.
10. Set the desired engine speed with the throttle.
Allow the engine to run at a moderate speed,
half throttle
, for 3-5 minutes before loading it too
heavily.