Dixon DX152, Руководство оператора

Страница: 17 / 68

CONTROls
17
Rollover Protection system (ROPS)
the ROPS increases the basic weight of the unit by
70 lbs / 32 kg. the ROPS is an accessory.
• Do not use ROPS as a lifting, attaching or
anchoring point.
• Do not use ROPS for wrecking or towing.
• Do not exceed Max GVW: 2822 lbs/1283 kg.
• Read machine operator´s manual before each
use.
• Securely fasten the seat belt when using the unit
with the ROPS in the upright position.
• When operating with the ROPS in the folded
position, the seat belt should not be worn.
• Where possible, avoid operating the unit near
ditches, embankments and holes.
• Reduce speed when turning, crossing slopes and
on rough, slick or muddy surfaces.
• Stay off slopes too steep for safe operation.
• Watch where you are going, especially at row
ends, on roads and around trees.
• Do not permit others to ride.
• Operate the mower smoothly without jerky turns,
starts or stops.
• When mower is stopped, set brakes securely and
use park brake.
• If any part of ROPS is damaged, the entire ROPS
must be replaced.
• Check all bolts including seat belt for correct
torque before each use.
• Check ROPS structure for damage before each
use.
• ROPS bar is nOt intended for use in sub zero
temperatures.
WARNING!
The rollover protection system's
capabilities may be impaired by damage
if the mower is overturned or if alteration
to the ROPS occurs. If these conditions
take place, the total structure MUST be
replaced.