![Dixie Chopper Pursuit 1832S Скачать руководство пользователя страница 23](http://html1.mh-extra.com/html/dixie-chopper/pursuit-1832s/pursuit-1832s_safety-operation-and-maintenance-manual_2511134023.webp)
21
700493
OPERATION
7
7.5 STARTING THE ENGINE
Start the engine with the operator behind the mower, the PTO
switch in the OFF position and the parking brake engaged.
Remove your hands from the drive control levers.
Set the throttle lever to half throttle.
Turn the ignition switch to the RUN position. The hour meter will
show the engine operation hours.
Turn the ignition switch to the START position. Release the key
when the engine starts. Allow 30 seconds between start tries to
allow the starter motor to become cool.
Allow the engine to become warm before you operate the engine
at full throttle.
7.6 TO STOP THE ENGINE
To stop and park the mower in normal conditions:
1. Turn the PTO switch to the OFF position. Drive the mower to a flat and level area to park the mower.
2. Remove your hands from the drive control levers.
3. Engage the parking brake.
4. Turn the ignition switch to the OFF position and remove the key before you leave the mower.
If an emergency occurs and you must park the mower in the area of operation, follow the guidelines set by the grounds
manager. If the mower is parked on a slope, chock or block the wheels.
NOTICE
Do not hold the ignition switch in the START position for
more than 10 seconds.
7 OPERATION
en-27
7.5
STARTING THE ENGINE____________________________________________________
Start the engine with the operator behind the mower, the PTO
switch in the OFF position and the parking brake engaged.
Remove your hands from the drive control levers.
Set the throttle lever to half throttle.
Turn the ignition switch to the RUN
position. The hour meter will
show the engine operation hours.
Turn the ignition switch to the START position. Release the key
when the engine starts. Allow 30 seconds between start tries to
allow the starter motor to become cool.
Allow the engine to become warm before you operate the engine
at full throttle.
7.6
TO STOP THE ENGINE _____________________________________________________
To stop and park the mower in normal conditions:
1.
Turn the PTO switch to the OFF position. Drive the mower to a flat and level area to park the mower.
2.
Remove your hands from the drive control levers.
3.
Engage the parking brake.
4.
Turn the ignition switch to the OFF position and remove the key before you leave the mower.
If an emergency occurs and you must park the mower in the area of operation, follow the guidelines set by the grounds
manager. If the mower is parked on a slope, chock or block the wheels.
NOTICE
Do not hold the ignition switch in the START position for more
than 10 seconds.
S
TOP
HR
S
TOP
HR
Throttle
Lever
PTO
Switch
Ignition
Switch
Ignition
Switch
WZT 1836S
WZT 1836D/1844D
Содержание Pursuit 1832S
Страница 50: ...48 700493 NOTES13 ...
Страница 51: ...49 700493 NOTES13 ...