Ditel KOSMOS BETA-M, Руководство пользователя

Страница: 9 / 52

69
69
26 to 36 : SPECIAL FUNCTIONS (cont.)
Nº Name Function Action
28 ASCII Send the display last four digits to a Micra-S indicator Edge
29 SETS INHIBIT Suspends setpoint operations and keeps the outputs to their OFF state Level
30 BATCH Adds the current display value to the totalizer and increments the batch
counter in one unit.
If the integrator is enabled (menu 23), this function does not work Edge
31 VIEW TOTAL Calls the totalizer value to the second display Level
32 VIEW BATCH Calls the batch counter to the second display Level
33 RESET
TOTAL+BATCH
Resets the totalizer and the batch counter Edge
34 STOP TOTAL Inhibits the integrator operation Level
35 PRINT
TOTAL+BATCH
Prints out the totalizer value and the batch counter value. If the integrator is
enabled, only the totalizer value is printed. Edge
36 PRINT PEAK Hold and print max reading.
When this function is programmed the peak value detection is stopped. In the
activation edge, the peak register is cleared from the memory and the unit
starts reading new peak values. In the deactivation edge, the peak value
registered during the time the function was active is printed out through the
serial output Level
26 to 36 : SPECIAL FUNCTIONS (cont.)
Nº Name Function Action
28 ASCII Send the display last four digits to a Micra-S indicator Edge
29 SETS INHIBIT Suspends setpoint operations and keeps the outputs to their OFF state Level
30 BATCH Adds the current display value to the totalizer and increments the batch
counter in one unit.
If the integrator is enabled (menu 23), this function does not work Edge
31 VIEW TOTAL Calls the totalizer value to the second display Level
32 VIEW BATCH Calls the batch counter to the second display Level
33 RESET
TOTAL+BATCH
Resets the totalizer and the batch counter Edge
34 STOP TOTAL Inhibits the integrator operation Level
35 PRINT
TOTAL+BATCH
Prints out the totalizer value and the batch counter value. If the integrator is
enabled, only the totalizer value is printed. Edge
36 PRINT PEAK Hold and print max reading.
When this function is programmed the peak value detection is stopped. In the
activation edge, the peak register is cleared from the memory and the unit
starts reading new peak values. In the deactivation edge, the peak value
registered during the time the function was active is printed out through the
serial output Level