Ditel KOSMOS BETA-M, Руководство пользователя

Страница: 12 / 52

72
72
6.1 - Lockout programming routine
The lock-out programming routine is entered by depressing
the
ENTER
key for 3 seconds and introducing a security code.
This gives access to either the parameter list or to change the
code if desired.
If the user opts for changing the code, the unit asks for the
new one and returns to the normal operation. The old code is
replaced with the user selected one, that will be asked next
time this routine is entered.
When the user enters the parameter list, each parameter is
indicated in the second display, while in the first one a
blinking digit allows setting a ‘1’ to lock this item, or a ‘0’ to
free it.
There are two ways to lock-out the program; One is to lock
everything, which is accomplished by setting a ‘1’ in the ‘tot-
LC’ parameter (the remaining parameters are skipped except
the tare key lock).
The second is to individually lock some parts of the program
menus leaving free those parts which are more liable to have
changes during normal operation.
88888
3s?
- - - -
CodE
-YES-
CHAnG
-no-
CHAnGE
0
tot-LC
tot-LC?
0
tArE
0
SEt1
0
SEt2
0
SEt3
0
SEt4
0
InPut
0
SCAL
0
FILt
0
AnAout
0
rs coM
0
LoGInP
0
SP VAL
- - - -
CodE
code OK
1
0
yes
no
yes
6.1 - Lockout programming routine
The lock-out programming routine is entered by depressing
the
ENTER
key for 3 seconds and introducing a security code.
This gives access to either the parameter list or to change the
code if desired.
If the user opts for changing the code, the unit asks for the
new one and returns to the normal operation. The old code is
replaced with the user selected one, that will be asked next
time this routine is entered.
When the user enters the parameter list, each parameter is
indicated in the second display, while in the first one a
blinking digit allows setting a ‘1’ to lock this item, or a ‘0’ to
free it.
There are two ways to lock-out the program; One is to lock
everything, which is accomplished by setting a ‘1’ in the ‘tot-
LC’ parameter (the remaining parameters are skipped except
the tare key lock).
The second is to individually lock some parts of the program
menus leaving free those parts which are more liable to have
changes during normal operation.
88888
3s?
- - - -
CodE
-YES-
CHAnG
-no-
CHAnGE
0
tot-LC
tot-LC?
0
tArE
0
SEt1
0
SEt2
0
SEt3
0
SEt4
0
InPut
0
SCAL
0
FILt
0
AnAout
0
rs coM
0
LoGInP
0
SP VAL
- - - -
CodE
code OK
1
0
yes
no
yes