Ditel KOSMOS BETA-M, Руководство пользователя

Страница: 47 / 52

If selected Load Cell
SCAL tEACH dSP FILt round ModTA Sbr
If selected Load Cell
SCAL tEACH dSP FILt round ModTA Sbr
-oFF- -on-
-oFF- -on-
106
107
SENSOR BREAK
This function allows detecting any broken wire that connect the sensor “Load Cell” to the instrument. The analysis to detect the
broken wires is done every 1,5 seconds and the response of Relays and ANA options (if used) will be the same if it were a
overflow (oVFLo) situation, input signal greater than allowed.
NOTE: This detection system works only if the sensor is supplied with the excitation voltage from the instrument.
If the input “Load Cell” has been programmed, on the menu 20 “CndSP” after the submenu 28 with an other press of
key
we got the submenu 29 -Sbr- Sensor Break and pressing
ENTER
key is possible to select –on- to activate or –oFF- to
deactivate.
SENSOR BREAK
This function allows detecting any broken wire that connect the sensor “Load Cell” to the instrument. The analysis to detect the
broken wires is done every 1,5 seconds and the response of Relays and ANA options (if used) will be the same if it were a
overflow (oVFLo) situation, input signal greater than allowed.
NOTE: This detection system works only if the sensor is supplied with the excitation voltage from the instrument.
If the input “Load Cell” has been programmed, on the menu 20 “CndSP” after the submenu 28 with an other press of key
we got the submenu 29 -Sbr- Sensor Break and pressing
ENTER
key is possible to select –on- to activate or –oFF- to
deactivate.