Ditel KOSMOS BETA-M, Руководство пользователя

Страница: 13 / 52

73
73
Output options with instructions manual edited before
December 1999, work properly with new versions of
Beta-M but some new features may not be described in
the options manual.
If you are using an older output card connected to a
new Beta-M and you want to take benefit of the new
functions (see page 60), please call for an updated
edition of the options manual.
Optionally, model BETA-M can incorporate one or several
output options for communications or control including :
COMMUNICATION
RS2
Serial RS232C
RS4 Serial RS485
BCD BCD 24V/TTL
CONTROL
ANA Analogue 4-20 mA, 0-10 V
2RE 2 SPDT relays 8 A
4RE 4 SPST relays 5 A
4OP 4 open-collector NPN outputs
4OPP 4 open-collector PNP outputs
All options are optoisolated with respect to the input signal.
The options are supplied with a specific instructions manual
describing characteristics, installation, connections and
programming. The output cards are easily installed on the
meter's main board by means of plug-in connectors and each
one activates its own programming module that provides
complete software-configuration.
Additional capabilities of the unit with output options :
• Control and processing of limit values via ON/OFF logic
outputs (2 relays, 4 relays, 4 NPN outputs or 4 PNP
outputs) or proportional output (4-20 mA or 0-10 V).
• Communication, data transmission and remote
programming via serial interface.
For more detailed information on characteristics, applications,
mounting and programming, please refer to the specific
manual supplied with each option.
7. OUTPUT OPTIONS
Output options with instructions manual edited before
December 1999, work properly with new versions of
Beta-M but some new features may not be described in
the options manual.
If you are using an older output card connected to a
new Beta-M and you want to take benefit of the new
functions (see page 60), please call for an updated
edition of the options manual.
Optionally, model BETA-M can incorporate one or several
output options for communications or control including :
COMMUNICATION
RS2
Serial RS232C
RS4 Serial RS485
BCD BCD 24V/TTL
CONTROL
ANA Analogue 4-20 mA, 0-10 V
2RE 2 SPDT relays 8 A
4RE 4 SPST relays 5 A
4OP 4 open-collector NPN outputs
4OPP 4 open-collector PNP outputs
All options are optoisolated with respect to the input signal.
The options are supplied with a specific instructions manual
describing characteristics, installation, connections and
programming. The output cards are easily installed on the
meter's main board by means of plug-in connectors and each
one activates its own programming module that provides
complete software-configuration.
Additional capabilities of the unit with output options :
• Control and processing of limit values via ON/OFF logic
outputs (2 relays, 4 relays, 4 NPN outputs or 4 PNP
outputs) or proportional output (4-20 mA or 0-10 V).
•
Communication, data transmission and remote
programming via serial interface.
For more detailed information on characteristics, applications,
mounting and programming, please refer to the specific
manual supplied with each option.
7. OUTPUT OPTIONS