Ditel KOSMOS BETA-M, Руководство пользователя

Страница: 11 / 52

71
71
The instrument is supplied with all software programming
parameters accessible to operator's modifications. After
completing the software configuration, it is recommended to
take the following steps:
1.
Lockout programming parameters to prevent from
accidental or unauthorized modifications.
2.
Lockout the tare key operation.
3.
The lockout can be applied to everything or to specific
menus or parameters. If some parameters should be
reprogrammed frequently, make a partial lock leaving
such parameters accessible. If no subsequent adjust
must be made, make a total lock.
4.
The access to the lockout routine is allowed by entering
a safety code. At fabrication this code is set to 0000. We
recommend to change this code and to write it down and
keep safe.
5.
Prior to configure the meter, it is recommended to
organize all data and keep a record s manual.
6. PARAMETER LOCKOUTS
TOTAL LOCKOUT
The access to the programming routines to read data is
allowed even if all parameters are locked out, but it won’t
be possible to enter or modify data. In this case, when
entering in the programming mode, the second display shows
the indication -dAtA- instead of -Pro-.
SELECTIVE LOCKOUT
When only some parameters are locked out, all configuration
data can be read but only non-protected parameters can
be modified. In such case, when entering in the
programming mode, the second display shows the indication
-Pro-.
Selective lock-outs include the following groups:
• Setpoint 1 configuration (menu 31).
• Setpoint 2 configuration (menu 32).
•
Setpoint 3 configuration (menu 33).
• Setpoint 4 configuration (menu 34).
• Input configuration (module 10).
• Scaling (menus 21/22, 23 and 27).
• Display options and filtering (menus 24, 25 and 26).
• Analog output configuration (module 40).
• Serial output configuration (module 50).
• Logic inputs configuration (module 60).
• Direct access to the programming of the setpoint values
Those that refer to optional outputs only appear if the
corresponding option is installed.
The instrument is supplied with all software programming
parameters accessible to operator's modifications. After
completing the software configuration, it is recommended to
take the following steps:
1.
Lockout programming parameters to prevent from
accidental or unauthorized modifications.
2.
Lockout the tare key operation.
3.
The lockout can be applied to everything or to specific
menus or parameters. If some parameters should be
reprogrammed frequently, make a partial lock leaving
such parameters accessible. If no subsequent adjust
must be made, make a total lock.
4.
The access to the lockout routine is allowed by entering
a safety code. At fabrication this code is set to 0000. We
recommend to change this code and to write it down and
keep safe.
5.
Prior to configure the meter, it is recommended to
organize all data and keep a record s manual.
6. PARAMETER LOCKOUTS
TOTAL LOCKOUT
The access to the programming routines to read data is
allowed even if all parameters are locked out, but it won’t
be possible to enter or modify data. In this case, when
entering in the programming mode, the second display shows
the indication -dAtA- instead of -Pro-.
SELECTIVE LOCKOUT
When only some parameters are locked out, all configuration
data can be read but only non-protected parameters can
be modified. In such case, when entering in the
programming mode, the second display shows the indication
-Pro-.
Selective lock-outs include the following groups:
• Setpoint 1 configuration (menu 31).
• Setpoint 2 configuration (menu 32).
• Setpoint 3 configuration (menu 33).
• Setpoint 4 configuration (menu 34).
• Input configuration (module 10).
• Scaling (menus 21/22, 23 and 27).
• Display options and filtering (menus 24, 25 and 26).
• Analog output configuration (module 40).
• Serial output configuration (module 50).
• Logic inputs configuration (module 60).
• Direct access to the programming of the setpoint values
Those that refer to optional outputs only appear if the
corresponding option is installed.