156
To select a specific mode, press the
button and turn the knob to the desired
value. At this point, the time display will display the temperature measured by the
selected sensor.
To change this value, press the
button and turn the knob to the desired
temperature value.
This process may be used to calibrate the oven probes.
Figure 38: Temperature sensors.
7.14.2
USB upload
Loads the programs from a USB flash drive connected to the USB port and saves
them in oven programs 1 to 99. To update firmware, connect a USB flash drive to
the USB port and hold down the
button for a few seconds.
Figure 39: USB reader.
This feature is only available on ovens with USB connection.
7.14.3
USB download
Saves programs 1 to 99 from the oven to the USB flash drive connected to the
USB port. To update firmware, connect a USB flash drive to the USB port and hold
down the
button for a few seconds.
Содержание MyChef 10 GN 1/1
