Distform MyChef 10 GN 1/1, Инструкция по установке, эксплуатации и обслуживанию

Страница: 41 / 63

162
7.16 NightWatch
NightWatch allows the oven to automatically continue cooking after a power
outage. This feature is especially useful for unsupervised cooking.
This feature will only resume cooking if there is an outage and subsequent
recovery of power.
This feature must be enabled by the distributor and does not require
any intervention by the user. Be sure that all the risks of use are fully
understood.
When an outage occurs and power is subsequently recovered, the oven will
continue the cooking cycle in progress (if there was one) and continue with the
same settings that were used before the outage.
It also automatically checks the temperature in the cooking chamber. If the
temperature is lower than 56ºC, there may be a risk of bacterial contamination. In
that case, the oven will continue cooking but will show error 28 when the START/
STOP button is pressed to terminate the cooking cycle. When this occurs, the
final user will decide what to do with the food, considering the risks of a possible
bacterial contamination.
To minimize risk, check the food after the temperature error appears
when the cooking cycle resumes or dispose of it (Error 28).
This feature does not exist for Multi-time cooking.
Use the HACCP data registry to check the cooking cycles. See chapter
7.15.