Distform MyChef 10 GN 1/1, Инструкция по установке, эксплуатации и обслуживанию

Страница: 52 / 63

173
ENGLISH
In order to clean out the pumps, turn on the oven and activate the rinsing program
(see section 9.2.2.1). With the oven door closed, hold down the button for
two seconds until detergent is released in the cooking chamber. Likewise, hold
down the button for two seconds until rinse aid is released in the cooking
chamber. Once the circuits are filled, a rinsing cycle must be done to eliminate
the remaining detergent and rinse aid that has spilled in the chamber during the
previous process.
Always run a rinsing program (RNS) once the self-cleaning pumps
have been cleaned out. The program will clean out the detergent
and rinse aid remnants that may be left in the cooking chamber.
9.3 Compartment behind exhaust
The part that separates the cooking chamber from the fan and heating element
can be removed to clean the area. To remove the part, you must remove two
screws from the bottom.
Figure 58: Exhaust fastening screws.
Once it has been removed, begin manual or automatic cleaning (see chapters 9.2.1
y 9.2.2).