PAGE 12
3. Pull out the internal and external power cords
& LAN cable each side in advance and lead them
to the bottom of the base along the inside of the telescopic siderails (Fig. 4).
Note: Use the pre-at
t
ached 3-way spring lever connector block when connecting the internal
power cord sections (see inset below).
4. Insert the decorative covers into the telescopic siderails to block the power cord & LAN cable
(Fig. 5). Attach the “Siderail Cover Plates” with “m3x5 screws” - qty. 4 per cover plate.
Fig. 4
Fig. 5
