PAGE 9
3. Pull out the internal and external power cords
& LAN cable each side in advance and lead
them to the bottom of the base along the inside of the telescopic siderails (Fig. 4). Then fix the
telescopic siderails to the “Floor Stand Base” with “m6x35 screws” - qty. 4 per side.
Note: Use the pre-at
t
ached 3-way spring lever connector block when connecting the internal
power cord sections (see inset below).
3. Insert the decorative covers into the telescopic siderails to block the power cord & LAN cable
(Fig. 5).
Fig. 4
Fig. 5
