Dish Network Platinum DishPVR 501, Руководство пользователя

Страница: 59 / 148

Page 53
Use Event Timers
Page 53
4. Select a Timer Type option. A check mark
shows up next to the option you select. For
example
, here we selected the
DVR
option.
5. Select a
Timer Frequency
option. A check
mark shows up next to the option you select.
For example, here we selected the
Once
option.
6. Select a channel:
Either : Use the
UP
or
DOWN ARROW
button to highlight a channel.
Then, press the
SELECT
button.
Or : Use the number buttons to enter a channel number.
7. Only for a Once (one-time), DVR Event Timer, you can select the
Protect Recording check box. If you do this, a check mark shows up in
the box.
Note
: If you want to delete a protected program, the receiver will ask
you if you are sure you want to delete the event.
8. Select the
Set Date/Time
option.
This opens the
Set Date/Time for Manual Timer
menu.
9. Use the number buttons to enter the
Start Time
(make sure you select
AM
or
PM
) and the
End
Time
, (make sure you select
AM
or
PM
).
Note:
The menu displays zeroes for you in numbers
like “07”.
10. Use the number buttons to enter the Date .
11. Select the
Create Timer
option.
12.
Either
: To set another event timer, select the
Create
option again.
Or
: If you don’t want to set another event timer, press the CANCEL
button.
When Event Timers Overlap
If you try to set event timers for programs on at the same time and date, the
receiver displays a conflict menu with the dates and times of both programs.
To resolve the conflict, pick which timer to keep and which timer to delete.
Note
: The receiver deletes one-time event timers right after they work. You
must delete all other types of timers yourself.
Tip: You can
use a Manual
Event Timer to
record a
“block” of
programs on
the same
channel, or to
make sure you
don’t miss the
last few
minutes of a
sports event
that goes into
overtime.