DEVOS -- Enterprise Video System
Page 31
DEVOS
StreamPump
If you have StreamPump(s) configured, and if “Allow Remote” is enabled on the
StreamPumps, they will appear in the StreamPump sections, and you may manage
them from this page. Select StreamPump Info, and then Settings for each
StreamPump.
Name – change the name
Intelligent Caching – when set to ON, the StreamPump will cache content as
needed.
Per-Devos channel basis – when on, any channel that as “StreamPump”
enabled will have that content downloaded to the StreamPump at the
specified time (the time setting is shown when you select On).
Media Expire Days – When On, any content on the StreamPump will be
removed this number of days after it was downloaded to the StreamPump.
Maximum Simultaneous – sets the number of simultaneous downloads the
StreamPump may use. Default is 1.
Select “Set IP” for each StreamPump if you wish to modify which network the
StreamPump will serve. Enter the IP using the format shown.
This allows you to specify the portions of your network to be served by this
StreamPump. By default the StreamPump will serve everyone on the same network.
But if you want StreamPump to only serve those with an address 192.168.x then enter
that and add it.