24
3 Preparing for use
3
Preparing for use
3.1 Unpacking
1.
Unpack the appliance and its accessories (fig. 1).
2.
Check the contents for completeness and possible damage.
3.2 Attaching the steam hose
1.
Open the lid of the steam hose connection nozzle (Fig. 2/A).
2.
Put the steam hose adapter into the steam hose connection nozzle
(Fig. 2/B). You will hear and feel both its release catches (Fig. 2/1) snap
into place.
3.3 Preparing to steam-clean small surfaces
Mount accessory adapter (Fig. 3/A):
1.
Attach the accessory adapter to the steam pistol as shown (Fig. 3/A).
You will feel and hear it snap into place.
Attaching further accessories:
1.
Select a special attachment:
- the
plastic brushes
(Fig. 4/A,B) on insensitive surfaces to remove
large quantities of dirt;
- the
jet nozzle
(Fig. 4/C), if you want the steam jet to be more concen-
trated than when just using the accessory adapter;
- the
spatula attachment
(Fig. 4/D) on insensitive, flat surfaces to re-
move stubborn layers of dirt;
- the
crevice brush
(Fig. 4/E) to remove stubborn dirt from between
tiles and cracks;
- the
2-in-1 combi attachment with scraper lip
(Fig. 5/A,B) to steam-
clean smooth polished surfaces;
- the
2-in-1 combi attachment with cotton cover
(Fig. 5/C) to steam-
clean upholstery and clothes.
2.
Push the selected attachment onto the accessory adapter so that the
small triangle on the respective attachment and the arrow on the acces-
sory adapter are opposite one another (Fig. 4, Fig. 5).
3.
Lock the selected attachment to the accessory adapter by turning it
through 90° as shown (Fig. 4, Fig. 5).
ATTENTION:
Always transport/send the appliance in its original packaging to avoid
transport damage. Keep the packaging for such an event.
However, dispose of no-longer-needed packaging material properly.
NOTE:
Immediately contact your dealer if you have found damage resulting
from transport.
B
1
A
2
NOTE:
If you want to release the steam hose after use, press both the release
catches (Fig. 2/1) on the steam hose adapter and pull it off.
A
B
click!
3
90°
90°
90°
90°
90°
A
B
C
D
E
4
A
A
B
90°
C
5
NOTE:
Before you can fix the special nozzles to the steam pistol, you have to
mount the accessory adapter. If required, you can also use the acces-
sory adapter without any further attachment for numerous cleaning jobs.
NOTE:
To release the accessory adapter at any time, push the release catch on
the steam pistol.
NOTE:
The attachments shown (Fig. 4, Fig. 5) can only be put onto the previ-
ously mounted accessory adapter.
NOTE:
Should you wish to release the adapter from the attachment, simply
rotate it through 90° in the other direction and pull it off forcefully.
M319.book Seite 24 Donnerstag, 28. November 2013 2:39 14
