Directed VW02, Руководство специфичное для прошивки, Страница: 6 / 43

6
Directed Digital System VW02
© 2016 Directed. All rights reserved.
Analog harness (H3), 18-pin white connector
Conn./Pin Color Description
H3/1 Lt. Blue/Red No Connection
H3/2 Black/White (-) Parking Brake Input (Manual Transmission)
2
H3/3 Gray (-) Hood Input 2
H3/4 N/A No Connection
H3/5 Gray/Black (+) Glow Plug Input
2
H3/6 Violet/White (AC) Tach Input
2
H3/7 Dark Blue (-) Clutch Output (Manual Transmission)
H3/8 Brown/Black Horn
1
H3/9 Red/White (-) Trunk Release Output
1
H3/10 White/Green (-) Door Input
2
H3/11 Yellow/Green (+) Door Input
2
H3/12 Blue/Red No Connection
H3/13 Light Blue (-) Trunk Trigger Input
2
H3/14 Pink/Yellow (-) Activation (Start Trigger) Input
H3/15 Dark Green Lock
1
H3/16 Brown/White (+) Brake Input 2
H3/17 Brown (+) Siren Output
1
H3/18 Blue/White (-) GWR (Ground While Running)
1
MC501 harness (H4), 8 thick-gauge wires (optional)
Conn./Pin Color Description
H4/1 Pink/White No Connection
H4/2 Red/White No Connection
H4/3 Pink No Connection
H4/4 Red No Connection
H4/5 Orange No Connection
H4/6 Red No Connection
H4/7 Green No Connection
H4/8 Violet No Connection
1. If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed. Note that they are
low current and a relay may be necessary.
2. These connections are only required if the corresponding statuses are not supported by the firmware. See "Vehicle application guide"
on page 4 for a list of compatible features.