Directed VW02, Руководство специфичное для прошивки, Страница: 26 / 43

26
Directed Digital System VW02
© 2016 Directed. All rights reserved.
Module programming
Refer to "LED diagnostics and troubleshooting" on page 28 for more information and for troubleshooting
purposes.
To connect the module:
Key type
1
Please ensure that the vehicle is in a safe location and cannot move
forward during programming. For vehicles equipped with a manual
transmission, make sure the gearshift lever is in the neutral position.
2
Connect all the harnesses to the Directed Digital System,
EXCEPT
the
white12-pin main power harness.
Connect all but the
white 12-pin harness
3
Connect the white12-pin main power harness, and wait until the LED turns
ON solid red.
Must be connected LAST
&
Solid
4
Press the Unlock button on the OEM remote.
5
Turn the ignition ON. The LED flashes green.
START
Key OUT
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
&
Flashes
6
The green LED turns ON for 3 seconds and shuts OFF.
Solid x3 secs
&
OFF
7
Turn vehicle ignition OFF once the module is successfully programmed.
START
Key OUT
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
8
Pair remotes (if applicable). For information on how to pair a specific
remote, please refer to its corresponding owner documentation, which
can be found inside the product packaging of the complete system or on
www.directechs.com.*
Pair
remotes*
9
By default, the tachometer is preprogrammed for the vehicle. For
instructions on how to program tach, refer to the Analog Installation
Guide, which can be found on www.directechs.com.
Initialize
tachometer
* Your aftermarket remote may differ from the model shown in the illustrations.