
27
Directed Digital System VW02
© 2016 Directed. All rights reserved.
Push-To-Start type
1
Please ensure that the vehicle is in a safe location an cannot move
forward during programming. For vehicles equipped with a manual
transmission, make sure the gearshift lever is in the neutral position.
2
Connect all the harnesses to the Directed Digital System,
EXCEPT
the
white12-pin main power harness.
Connect all but the
white 12-pin harness
3
Connect the white12-pin main power harness, and wait until the LED turns
ON solid red.
Must be connected LAST
&
Solid
4
Press the Unlock button on the OEM remote.
5
Make sure the key is inside the vehicle.
Key Inside
the Vehicle
6
Important:
Do NOT press the brake pedal.
Press the Push-to-Start (PTS) button once to turn the ignition ON. The LED
flashes green.
Do NOT press
the brake
pedal
Flash
&
PUSH x1
7
The green LED turns ON for 3 seconds and shuts off once the module is
successfully programmed.
OFF
&
Solid x3 secs
8
Press the Push-to-Start (PTS) button once more to turn the ignition OFF.
PUSH x1
9
Pair remotes (if applicable). For information on how to pair a specific
remote, please refer to its corresponding owner documentation, which
can be found inside the product packaging of the complete system or on
www.directechs.com.*
Pair
remotes*
10
By default, the tachometer is preprogrammed for the vehicle. For
instructions on how to program tach, refer to the Analog Installation
Guide, which can be found on www.directechs.com.
Initialize
tachometer
* Your aftermarket remote may differ from the model shown in the illustrations.
Содержание VW02
Страница 34: ...Directed Digital System VW02 2016 Directed All rights reserved Notes...
Страница 37: ...Directed Digital System VW02 2016 Directed All rights reserved Notes...
Страница 40: ...Directed Digital System VW02 2016 Directed All rights reserved Notes...
Страница 43: ...Directed Digital System VW02 2016 Directed All rights reserved Notes...