Directed VW02, Руководство специфичное для прошивки, Страница: 11 / 43

11
Directed Digital System VW02
© 2016 Directed. All rights reserved.
Installation
Type 1 - Regular Key
16 Black
3 Wh
4 White
12 White
4 Red
7 White
2 Wh
2 Bk
6 Gr
een
18 White
Manual/Auto. Transmission Type
Prog.
Button
Manual/Auto. Transmission Type
Prog.
Button
FT CAN High: Orange/Green : 7
FT CAN Low: Orange/Brown : 8
10: Red : (+) 12V
(+) 12V
[2]
(+) Siren Output: Brown : 17
9: Black : (-) Ground
With the exception of the OBDII diagnostic connector, all connectors are displayed from the wire side (unless specified otherwise).
Siren
[1]
The installation of an aftermarket hood pin is
only
required on vehicles that are
not
equipped with a factory hood pin.
[3]
For Key Wrap instructions refer to pages 7-10.
[4]
For manual transmission vehicle only.
Hood Pin
[1]
(-) Hood Input: Gray : 3
6 5 4 2 3 1
12
11 8 9 10 7
(+) Starter: Red/Black
or Black , pin 1
(+) Ignition: Black or
Black/Green , pin 11
FT CAN Low: Orange/ Brown , pin 7
FT CAN High: Orange/Green , pin 8
[4]
(-) Clutch: Violet/Black , pin 7
VESCM - Driver side,
under dashboard
E plug
at VESCM
G plug
at VESCM
F
H
G E
16
8
9
1
10
2
11
3
12
4
13
5
14
6
15
7
4: Yellow/Red : Key Wrap
[3]
5: Orange/Red : Key Wrap
[3]
3: Brown/Red : Key Wrap
[3]
2: White/Brown : (+) Ignition Output
1: White : (+) 12V
(+) Starter Output: Green/Red: 14
The Remote Start
Safety Override
Switch
MUST be in
the ON position.
Remote Start Safety
Override Switch
(-) Ground
(-) Clutch Output: Dk.Blue : 7
[2]
The siren is only compatible with Directed Digital Hybrid Systems.