Directed VW02, Руководство специфичное для прошивки, Страница: 38 / 43

Directed Digital System VW02
© 2016 Directed. All rights reserved.
Quick Reference Guide – Viper, Clifford, Python, Avital & Automate (Smart Key)
Vehicle takeover with Smart Key
1
Close the vehicle doors, hood and trunk, then
press the
Remote Start button on the transmitter to
start the vehicle.*
Press Remote
Start button*
2
Press the Unlock button on the factory or
aftermarket remote.*
Press Unlock on
either remote*
OF
F
ST
AR
T
IG
N
OF
F
ST
AR
T
IG
N
OF
F
ST
AR
T
IG
N
OR
Complete the following steps within 45 seconds or the vehicle will shut down.
3
Enter the vehicle, while making sure the key is
inside with you.
O
FF
START
IG
N
O
FF
START
IG
N
O
FF
START
IG
N
Enter vehicle
with remote
4
Depress the brake pedal, put the car in gear and
drive off.
Ready to
drive off
* Your key may differ from the model shown in the illustrations.
Manual transmission ready mode
1
While the vehicle is running, put the gear in
Neutral
(N).
Put
gear in
Neutral
2
Depress the vehicle’s foot brake.
Depress
brake
pedal
3
Apply the emergency brake.
Apply
emergency
brake
4
Release the vehicle’s foot brake.
Warning!
Depressing the brake pedal again after this
step will disable the remote start feature.
Release
brake
pedal
5
Press any button on the transmitter.* The parking
lights flash 5 times confirming that the remote start
feature is active.
Note
: If the parking lights do not flash 5 times, you
have not entered manual transmission mode and will
need to repeat steps 1 to 5.
Parking lights flash x5
Press any
button*
&
6
Exit the vehicle.
Exit vehicle
7
Press the
Lock
button on the transmitter.*
The vehicle engine will shut Off after locking
the system.
Press Lock on
either remote*
OF
F
ST
AR
T
IG
N
OF
F
ST
AR
T
IG
N
OF
F
ST
AR
T
IG
N
OR
* Your key may differ from the model shown in the illustrations.