Directed Electronics Hornet 740T, Руководство по установке

Страница: 20 / 29

2 20 0
© 2004 Directed Electronics, Inc. Vista, CA
1. O Op peen n aa d do oo orr.. (The GREEN wire, H1/5, or the VIOLET, H1/7 must be connected.)
2. K Keeyy.. Turn the ignition on. (The H1/9 YELLOW switched ignition input must be connected.)
3. SSeelleecctt tth hee rreecceeiivveerr cch haan nn neell.. Press and release the Valet®/Program switch the number of
times necessary to access the desired channel. Once you have selected a channel, press
and H HO OLLD D the Valet®/Program switch once more. The siren will chirp and the LED will blink
the number of times corresponding to the channel that has been accessed.
N NO OTTEE:: If adding a remote, a button must be taught to Channel 1 prior to programming other chan-
nels.
4.
P Prreessss tth hee ttrraan nssm miitttteerr b bu utttto on n.. While H HO OLLD DIIN NG G the Valet®/Program switch, press the trans-
mitter button that you wish to assign to that channel. The unit will chirp indicating
successful programming. You cannot teach a transmitter button to the system more than once.
N NO OTTEE:: For Channel 7, press Button I (see Transmitter Configuration section of this guide) to
program the Auto-learn Standard Configuration on a three-button transmitter.
CCH HA AN NN NEELL P PR REESSSS A AN ND D R REELLEEA ASSEE
N NU UM MB BEER R TTH HEE V VA ALLEETT//P PR RO OG GR RA AM M SSW WIITTCCH H TTO O P PR RO OG GR RA AM M FFU UN NCCTTIIO ON N
1 One Time Arm/Disarm/Panic
2 Two Times Channel 2
3 Three Times Channel 3
4 Four Times Arm Only
5 Five Times Disarm Only
6 Six Times Panic Only
7 Seven Times Auto-learn* for 3-button transmitters
8 Eight Times Delete all transmitters**
* *N NO OTTEE:: The Auto-learn function cannot be used to program an optional four-button trans-
mitter; the channels must be taught to the transmitter individually. See Transmitter
Configuration section of this guide for a description of Auto-learn transmitter programming.
* ** *N NO OTTEE:: If any button from a known transmitter is programmed to Channel 8, all transmit-
ters will be erased from memory and will revert to the default feature settings. (See Features
Menu section of this guide.) This is useful in cases where one of the customer's transmitters
is lost or stolen. Channel 8 will erase any lost or stolen transmitters from the system's
memory and can also be used to start from scratch if the transmitter buttons were pro-
grammed incorrectly.