Directed Electronics Clifford 590.4X страница 13 Скачать руководство пользователя

Страница: 13 / 23

4. Siren Duration

1. 30sec: the siren output for full trigger activations and Panic mode is 30 seconds

2. 60sec: the siren output for full trigger activations and Panic mode is 60 seconds

5. Ign-controlled Locks

1. No Ign-locking: the door lock/unlock outputs will not activate when ignition is turned on/off

2. Lock & Unlock: the door lock & unlock output will activate when ignition is turned on & off

3. Lock Only: the door lock output will activate when ignition is turned on

4. Unlock Only: the door unlock output will activate when ignition is turned off

6. Door Lock Pulses

1. Single: the door lock & unlock outputs will pulse once

2. Double Unlock only: the unlock output only will pulse twice

3. Double Lock Only: the lock output only will pulse twice

4. Double Lock & Unlock: the lock & unlock outputs will pulse twice

7. Door Lock Output Duration

1. 0.8 sec.: the door lock output pulses will be 800 ms in duration

2. 3.5 sec.: the door lock pulses will be 3.5 seconds in duration

3. 0.4 sec.: the door lock pulses will be 400 ms in duration

8. Ignition Controlled 2nd Unlock

1. After first unlock: for Ign-controlled unlocking, the 2nd unlock will activate 800 ms after the first (driver

door) unlock

2. With first unlock: for Ign-controlled unlocking, the 2nd unlock will activate at the same time as the first

(driver door) unlock

9. Comfort Closure

1. No comfort Closure: Comfort Closure is defeated when arming

2. Comfort Closure 1: the door lock pulse (or 2nd pulse for double pulses) will remain on for 20 sec-

onds.

3. Comfort Closure 2: 800mS following the end of the door lock pulse (or 2nd pulse for double pulses);

the door lock output will turn on again for 20 seconds.

10. Horn Function

1. Full Alarm Only: the horn output will pulse only during full trigger events.

2. Siren Function 20/30/40/50ms: The horn output will emulate the siren output with selectable output

timing to compensate for OEM horn inefficiency.

11. Hood Switch Type

1. Normally Open: for vehicles with a hood switch that rests at ground when the hood is OPEN

2. Normally Closed: for vehicles with a hood switch that rests at ground when the hood is CLOSED

12. Sensor Full Trigger

1. Single: full trigger activation of only one sensor is required to fully trigger the alarm

2. Double: full trigger activation of two sensors within a ten second period is required to fully trigger

the alarm.

13. Door Switch Type

1. Normally Open: for vehicles with door switches that rest at ground when the door is OPEN

2. Normally Closed: for vehicles with door switches that rest at ground when the door is CLOSED

14. Trunk Switch Type

1. Normally Open: for vehicles with a trunk switch that rests at ground when the trunk is OPEN

2. Normally Closed: for vehicles with a trunk switch that rests at ground when the trunk is CLOSED

15. Remote Button Unlock (Ign off)

1. On: a message telling the 2-way remote control to unlock the keypad is sent each time the vehicle

ignition is turned off

2. Off: no message is sent

Содержание Clifford 590.4X
























Результаты поиска

Содержание Clifford 590.4X

Отзывы:

Похожие инструкции для Clifford 590.4X

Бренды по названию

Популярные бренды

Directed Electronics Clifford 590.4X, Руководство по установке

Результаты поиска

Содержание Clifford 590.4X

Отзывы:

Похожие инструкции для Clifford 590.4X

Бренды по названию

Популярные бренды