Directed Electronics Clifford 590.4X Скачать руководство пользователя

Страница: 10 / 23

Remote Pairing

Prepare the vehicle system to be Paired with a new remote

Open

a door.

Turn

the key to the ON position.

3. Within 5 seconds

press

and

release

the Control button on the Control Center one time.

4. Within 5 seconds,

press

and

hold

the Control button on the Control Center. The status LED will flash one

time and the siren then chirps to confirm the vehicle is ready for remote pairing.

Release

the Control button and proceed below.

Note:

If no remote pairing results, the system will exit after 60 seconds.

Prepare the Responder HD 2-way remote control to be Paired with the system:

Remote Pair matches your HD remote to the system. Make sure the HD remote is set for the desired Car 1

(Default) or Car 2 operation for the system it will be paired with.

1. With the HD remote control display blank,

press

in and

hold

the menu wheel for 3 seconds until Settings

screen appears.

Toggle

the menu wheel until Adjustments screen appears

Press

in on the menu wheel to enter.

4. In the Adjustments menu highlight Remote Pair

and

press

in the Menu Wheel to go to the Remote Pair

screen. Follow the on screen instructions:

Press

and

hold

the

AUX

button until tones are played.

II. The system chirps the siren to indicate it has learned the HD remote ID and is sending its ID to the

remote.

III.

Release

AUX

button.

5. Successful or Failed Pair: The HD remote control indicates a successful or failed pairing on the display.

After a successful pairing, it then returns to the Adjustments menu. If pairing fails, it returns to the

Remote Pair screen,

press

the

AUX

button to attempt another pairing.

Prepare the vehicle system to be Paired with the companion or a new 1-way remote as described above.

Note: If no remote pairing results, the system will exit after 60 seconds.

Prepare the companion 1-way remote control to be Paired with the system:

Make sure the remote is set for the desired Car 1 (Default) or Car 2 operation for the system it will be paired

with.

1. Press and hold the

AUX

button for 8 seconds.

Note: If Car 2 mode is on, ignore the Car Select beep after 3 seconds.

2. Wait for the Transmit LED to light solid and the remote to beep. Release the

AUX

button.

3. Press the

AUX

button for 1 second. The transmit LED will blink 3 times and beep 3 times.

4. Within 5 seconds, press the

AUX

button.

5. The vehicle siren will chirp. You have now successfully learned the remote to the vehicle remote start and

security system.

6. Press the

AUX

button two times to exit learn routine on the remote. The transmit LED will turn off and exit

tone will sound.

Содержание Clifford 590.4X
























Результаты поиска

Содержание Clifford 590.4X

Отзывы:

Похожие инструкции для Clifford 590.4X

Бренды по названию

Популярные бренды

Directed Electronics Clifford 590.4X, Руководство по установке

Результаты поиска

Содержание Clifford 590.4X

Отзывы:

Похожие инструкции для Clifford 590.4X

Бренды по названию

Популярные бренды