background image

12

© 2011 Directed Electronics. All rights reserved.

Feature Menus

Default settings are Opt. 1 (in 

bolder

 type). New features are 

bold

 with grey background.

Menu 1 - Security

Menu 

Item 

Feature

Opt. 1

Opt. 2

Opt. 3

Opt.4

Opt. 5+

1

System Arming Mode

Active 

Passive Arm 

w/o lock

Passive Arm 

w/lock

Auto re-arm 

w/o lock

Auto re-arm w/

lock

2

Panic Mode

On

Ign Off only

Off

3

Confirmation Chirps 

On w/Warn 

chirps On

On w/Warn 

chirps Off

Off w/ Warn 

chirps On 

Off w/ warn 

chirps Off

4

Siren Duration

30 sec.

60 sec.

5

Ign-controlled Locks

No Ign- locking

Lock & Unlock 

Lock Only

Unlock Only

6

Door Lock Pulses 

Single

Double Unlock 

Only

Double Lock 

Only 

Double Lock & 

Unlock

7

Door Lock Output Duration

0.8 sec.

3.5 sec.

0.4 sec.

8

Ignition Controlled 2nd Unlock

2nd unlock on 

Ign-control after 

first unlock

2nd unlock on 

Ign-control  with  

first unlock

9

Comfort Closure 

No Comfort 

Closure

Comfort Clo-

sure 1

Comfort Clo-

sure 2

10

Horn Function 

Full Alarm Only

Siren Function 

20 ms

Siren Function 

30 ms

Siren Function 

40 ms

Siren Function 

50 ms

11

Hood Switch type

Normally Open

Normally 

closed

12

Sensor Full trigger

Single 

Double

13

Door Switch Type

Normally open

Normally

closed

14

Trunk Switch Type

Normally open

Normally

closed

15

Remote Button unlock (Ign off)

On

Off

1.  System Arming mode

1.  Active: the transmitter must be used to arm the system 

2.  Passive Arm w/o lock: after exiting the vehicle the system will automatically arm. The doors will not 

lock

3.  Passive Arm w/lock: after exiting the vehicle the system will automatically arm and lock the doors

4.  Auto re-arm w/o lock: if the vehicle is not entered after receiving a disarm command, the system will 

automatically re-arm. The doors will not lock

5.  Auto re-arm w/lock: if the vehicle is not entered after receiving a disarm command, the system will 

automatically re-arm and lock the doors

2.  Panic Mode

1.  On: the Panic output can be activated at any time 

2.  Ign Off Only : the Panic output can be activated only when the ignition is off

3.  Off: the Panic output is defeated

3.  Confirmation Chirps

1.  On w/Warn Chirps On: arm, disarm, and sensor warn-away chirps are active

2.  On w/Warn Chirps Off: arm and disarm chirps are active, warn-away chirps are defeated

3.  Off w/Warn Chirps On: arm and disarm chirps are defeated, warn-away chirps are active

4.  Off w/Warn Chirps Off: arm, disarm, and sensor warn-away chirps are defeated

Содержание Clifford 590.4X
























Отзывы: