Directed Electronics Clifford 590.4X Скачать руководство пользователя

Страница: 19 / 23

1. Zone 4 Sensor Type: sets the Zone 4 (Sensor 2) name to be displayed in the Text Field for Warn-away

and Full Trigger activations

2. Siren Duration: sets the Full Trigger output duration in 1 second intervals up to 180 seconds.

3. Aux/Trunk Icon Type: sets the Accessory animation to be displayed on the screen when the Aux/Trunk

output is activated/de-activated

4. Aux 1 Timed Output: sets the output duration in 1 second intervals up to 90 seconds for Aux 1

5. Aux 1 Icon Type: sets the Accessory animation to be displayed on the screen when the Aux 1 output is

activated/de-activated

6. Aux 2 Timed Output: sets the Aux 2 “Timed” output in 1 second intervals up to 90 seconds

7. Aux 2 Icon Type: sets the Accessory animation to be displayed on the screen when the Aux 2 output is

activated/de-activated

8. Aux 3 Timed Output: sets the Aux 3 “Timed” output in 1 second intervals up to 90 seconds

9. Aux 3 Icon Type: sets the Accessory animation to be displayed on the screen when the Aux 3 output is

activated/de-activated

10. Aux 4 Timed Output: sets the Aux 4 “Timed” output in 1 second intervals up to 90 seconds

11. Diesel Start Delay Timer: sets the delay before engine crank in 1 second intervals up to 90 seconds for

diesel engine vehicles

12. Timer Mode Runtime: sets the duration of runtime when the engine is started by the Timer Mode and Smart

Start features

13. Timer mode Starts: sets the number of times the engine will be started by the Timer Mode and Smart Start

features

14. Timer mode Intervals: sets the number of hours between engine starts by the Timer Mode and Smart Start

features

15. Smart Start Low Temperature: sets the low temperature threshold required for Smart Start to start the

engine

16. Smart Start High Temperature: sets the high temperature threshold required for Smart Start to start the

engine

17. Smart Start Low battery (Volts): sets the low battery level threshold required for Smart Start to start the

engine

18. Sensor 1 level: directly sets the sensor level of the on-board shock sensor

19. Starter Release Fine Tune: adds or subtracts crank time in Tachometer mode in order to overcome engine

types that short crank or over-crank on the first start attempt

20. Feature Programming: locks and unlocks the user’s ability to enter the feature menus and manually

change the main unit programming using the Control Center

21. Transmitter Programming: locks and unlocks the user’s ability to enter the HHU/Reset menu and manually

change any functions using the Control Center

22. Remote Start Runtime: sets the duration of runtime when the engine is started by remote command

23. VirtualTach Fine tune: adds or subtracts crank time in VirtualTach mode in order to overcome engine types

that short crank or over-crank on the first start attempt

Содержание Clifford 590.4X
























Результаты поиска

Содержание Clifford 590.4X

Отзывы:

Похожие инструкции для Clifford 590.4X

Бренды по названию

Популярные бренды

Directed Electronics Clifford 590.4X, Руководство по установке

Результаты поиска

Содержание Clifford 590.4X

Отзывы:

Похожие инструкции для Clifford 590.4X

Бренды по названию

Популярные бренды