Directed Electronics Clifford 590.4X страница 16 Скачать руководство пользователя

Страница: 16 / 23

Menu 3 - Remote start

Item

Feature

Opt. 1

Opt. 2

Opt. 3

Opt.4

Opt. 5+

Transmission Mode

Manual

Automatic

Engine Checking Mode

Virtual Tach

Voltage

Off

Tachometer

Cranking Time

0.6 sec.

0.8 sec.

1.0 sec.

1.2 sec.

1.4 (5)/ 1.6

(6)/ 1.8 (7)

2.0 (8)/ 4.0

(9)

Remote Start Runtime

12 min.

24 min.

60 min.

Activation Pulse Count

Turbo Mode

No Turbo Mode

On-1 min.

On-3 min.

On-5 min.

On- 10 min.

Timer Mode Runtime

12 min.

3 min.

6 min.

9 min.

Flex Relay Function

Ignition 2

Accessory 2

Starter 2

Diesel Start Delay

Wait-to Start

input

Timed 15 sec.

Timed 30 sec.

Timed 45 sec.

Accessory during Diesel Start

Delay

Off

Status 2 Output

Status

Latch Rear

Defogger

Pulse Rear

Defogger

Parking Light Output

Constant

Pulsed

Off

Anti-grind Output

Off

Tach Mode Starter Release

Normal

Increase

Decrease

Vehicle Temp

Auto Report

Off

Remote Start Safelock

Off

1. Transmission Mode

1. Manual: requires ‘Tachometer’ for the Engine Checking Mode, and requires the user to successfully

perform a procedure when parking the vehicle before remote starter will engage

2. Automatic: uses any of the Engine Checking Modes and does not require any special procedures

when parking

2. Engine Checking Mode

1. VirtualTach: battery voltage drop/rise during cranking determines when the starter output is released.

During runtime, constant voltage level is monitored to determine if the engine is running

2. Voltage: starter output during cranking is a programmed duration (Set in Cranking Time). During

runtime, constant voltage level is monitored to determine if the engine is running

3. Off: starter output during cranking is a programmed duration (Set in Cranking Time). The remote start

will keep the ignition/accessories active for the programmed runtime whether the engine is running

or not

4. Tachometer: tachometer input signal during cranking and runtime to determine when the starter out-

put is released and if the engine is running.

3. Cranking Time

•

0.6/0.8/1.0/1.2/1.4/1.6/1.8/2.0/4.0 seconds: determines the starter output duration during

cranking for the ‘Voltage’ and the ‘Off’ Engine Checking Mode options

4. Remote Start Runtime

•

12/24/60 minutes: sets engine runtime during normal remote start operations

5. Activation Pulse Count

•

1/ 2 pulses: sets the number of remote control commands received or Activation Input required to

activate and de-activate remote start

Содержание Clifford 590.4X
























Результаты поиска

Содержание Clifford 590.4X

Отзывы:

Похожие инструкции для Clifford 590.4X

Бренды по названию

Популярные бренды

Directed Electronics Clifford 590.4X, Руководство по установке

Результаты поиска

Содержание Clifford 590.4X

Отзывы:

Похожие инструкции для Clifford 590.4X

Бренды по названию

Популярные бренды