Direct PDCXX50IR, Инструкция по установке и настройке

Страница: 36 / 92

30
www.SecurityCamerasDirect.com
SECTION 4: DVR SETUP
5. Click the >> icon on the MD AREA line to specify the areas where of the screen where motion should be sensed. Defining
only these areas (and ignoring other areas) of the field of view improves the performance of the DVR.
The Motion Detection setup screen is partitioned into a grid of 10 x 15 blocks. Motion sensing in each block can be toggled on
and off by clicking the block area. Initially, all blocks are shaded purple, indicating that motion sensing is disabled everywhere.
To enable blocks (areas) for motion sensing, click the block, or use the mouse to drag a rectangle over areas you want to
enable. The shading will disappear for areas selected for motion detection. To disable an area selected, click on it.
Motion Sensing
Disabled
Motion Sensing
Enabled
6. After the motion sensing areas are selected (unshaded), right click to return to the MOTION DETECTION SETUP menu.
7. Check the box to right of the RECORD label to enable recording when motion is detected.
8. Check the box to right of the
BUZZER
label to sound the buzzer when motion is detected.
9. Check the box to right of the
PRERECORD
label to add the previous 5 seconds of video from the camera to the motion
detection recording.
10. Check the box to right of the
EMAIL
label to send an email when motion is sensed. To use this feature, the EMAIL configuration
settings in the NETWORK tab must be configured.