29
H.264 Video Surveillance System Setup Guide
SECTION 4: DVR SETUP
8. Click the checkbox to the right of the
HDD LOSS
label to enable this alarm. When the HDD is not available, this feature will
sound the buzzer and place the on the desktop.
9. Click the checkbox to the right of the
VIDEO LOSS
label to enable this alarm. When a video signal from a channel is not
detected, this feature will sound the buzzer and place the
Video Loss
label in the channel LIVE view window.
10. After configuring your network settings, click the confirm icon (
a
) in the lower right corner of the screen, click the
Confirm
button in the
Note
window.
11. Press the
MENU
button on the front panel, or right click anywhere to return to the ALARM menu.
4.6.1 Motion detection setup
Motion detection can be configured for each channel individually, or you can apply the same settings to all channels at one time.
1. On the
ALARM
tab menu, click the
>>
icon on the MOTION line to open the MOTION DETECTION menu.
2. Click the
q
icon at the right end of the
CHANNEL
line. From the dropdown list, select the camera channel number you want
to setup, or select ALL to configure all channels.
3. Click the
q
icon at the right end of the
SWITCH
line. From the dropdown list, select ON or OFF to enable or disable motion
detection on the channel(s).
4. Click the
q
icon at the right end of the
SENSITIVITY
line. From the dropdown list, select 1 .. 8 to set the level of sensitivity.
1 is highest, 8 is lowest. High sensitivity may cause an alarm when a small object, such as a bird or mouse, passes through
the field of view, whereas the lowest sensitivity level may be appropriate for detecting only cars that pass by. This setting is
dependent on the what you want to detect, and usually requires testing to find the best value.
Содержание PDCXX50IR
Страница 6: ...vi www SecurityCamerasDirect com ...
