Direct Fly ALTO 912 TG Скачать руководство пользователя страница 12

Страница: 12 / 119

AIRCRAFT MAINTENANCE MANUAL

DFE-AMM-AR1

Rev. 1 – 07/24/2014

1-1

Section 1 – GENERAL INFORMATION

1.1.

GENERAL

Direct Fly S.R.O. prepared this aircraft maintenance manual. It contains the information that a

trained mechanic will need to maintain the aircraft in an airworthy condition.

The Aircraft Maintenance Manual was prepared to meet the ASTM F2483 Standard Specification

requirements. The format of the manual is designed to be familiar to most modern aircraft mechanics.

This maintenance manual does not reflect part numbers and cannot be used for ordering

replacement parts.

The wiring schematics that have been included in the manual are for general information purposes

only. Aircraft will have optional equipment for which there will be specific drawings that will either be included
with the aircraft’s documentation on delivery.

1.2.

LAYOUT OF THE MANUAL

This maintenance manual is divided into Sections. The Section numbers appear at the foot

of each page.

1.3.

WARNINGS, CAUTION AND NOTES WARNING

AN OPERATING PROCEDURE, PRACTICE, OR A CONDITION, WHICH, IF NOT CORRECTLY

FOLLOWED OR REMEDIED, COULD RESULT IN SERIOUS PERSONAL INJURY OR LOSS OF LIFE.

An operating procedure, practice, or a condition, which, if not strictly observed or corrected, could

result in destruction of, or damage to equipment.

An operating procedure, practice or condition which is important to emphasize.

Содержание ALTO 912 TG
























































































































Результаты поиска

Содержание ALTO 912 TG

Отзывы:

Похожие инструкции для ALTO 912 TG

Бренды по названию

Популярные бренды

Direct Fly ALTO 912 TG, Руководство по техническому обслуживанию самолета

Результаты поиска

Содержание ALTO 912 TG

Отзывы:

Похожие инструкции для ALTO 912 TG

Бренды по названию

Популярные бренды