Dini Argeo DGT1SX Скачать руководство пользователя

Страница: 7 / 60

Optimized layout for A4 print.

USER_MAN_ENG_DGT1SX

Dear Customer,

Thank you for purchasing a DINI ARGEO product.

This manual contains all the instructions for a correct installation and commissioning of the high speed DGT1SX digital weight transmitter.

While thanking you for purchasing this product, we would like to draw your attention to some aspects of this manual.

This booklet provides useful information for the correct operation and maintenance of the scale to which it refers;

it is therefore essential to pay the greatest attention to all those paragraphs that illustrate the simplest and safest way to operate.

It is recommended that you carefully follow the instructions for programming the weight transmitter; performing actions not indicated in

this manual could compromise the proper functioning of the scale.

The utmost care has been taken in compiling this manual, but reports of any inaccuracies are always welcome.

The transmitter is covered by warranty and MUST NOT BE TAMPERED WITH BY THE USER under any circumstances.

Any attempt at repair or modification may expose the user to the danger of electric shock and voids any warranty conditions, relieving

the Manufacturer from all liability.

Any problem with the product must be reported to the manufacturer or to the retailer where it was purchased.

In any case, always TURN OFF THE POWER SUPPLY before any installation or repair operation.

Introduction

Содержание DGT1SX





























































Результаты поиска

Содержание DGT1SX

Отзывы:

Похожие инструкции для DGT1SX

Бренды по названию

Популярные бренды

Dini Argeo DGT1SX, Руководство пользователя

Результаты поиска

Содержание DGT1SX

Отзывы:

Похожие инструкции для DGT1SX

Бренды по названию

Популярные бренды