Dini Argeo DGT1SX, Руководство пользователя

Страница: 38 / 60

38
Optimized layout for A4 print.
888888
i
f.mode
A 888888
Setup
B
ConfiG
1
ini.al
4
i
USER_MAN_ENG_DGT1SX
MENU ACCESS: SAVING THE PARAMETERS:
Press the key during the start-
up procedure.
Press the
C
key several times, until the display shows
SAVE? . Press the key to confirm.
Complete menu
on pages
24 - 25
Reading the alibi memory
Initialising the alibi memory
FROM THE TRANSMITTER (MANUAL)
By pressing the key you can read a saved weight:
you will be asked to enter the rewrite number “
rew.id
” (from 0 to 255) and the ID number “
id
” (from 0 to 131072).
The weighing data are shown. Use the and keys to scroll through the following information:
• “
Ch.
X”, where X indicates the scale number.
• “
Um
YY”, where YY indicates the unit of measurement (
kG
,
G
,
t
or
lb
).
• “
Gross
”, followed by the gross weight.
• “
Tare
/
tarept
”, followed by the tare value.
Press the
C
key to return to weighing.
The weighing of an ID can only be verified if:
• it has a rewrite number equal to the current alibi memory number and a weighing number ≤ the last value received with the PID command;
• it has a rewrite number ≥ 0, but 1 less than the current alibi memory value, and a weighing number greater than the last value received
with the PID command.
FROM PC
To read a weighing operation from a PC, see the serial command
“ READING A WEIGHING OPERATION IN THE ALIBI MEMORY ”
on
page 57.
FROM PLC
To read a weighing operation from a PLC,
refer to the Modbus and Fieldbus protocol manuals.
If the alibi memory is empty, when the key is pressed the display shows “
empty
” for one second and returns to weighing mode.
If an invalid ID is entered, the display shows “
No id
” and returns to weighing mode.
Not visible if the transmitter is approved.
This operation deletes all saved weighing operations; it is not possible to delete a weighing operation individually.