Dini Argeo DGT1SX, Руководство пользователя

Страница: 37 / 60

37
Optimized layout for A4 print.
888888 F.mode
C
funCt viss
1 1
alibi
4
USER_MAN_ENG_DGT1SX
LEGEND:
Indicates repeated pressing of
the key.
Parameter visible only
under certain conditions.
Parameter or menu subject
to approval.
Default value of the parameter.
Alibi memory
Enabling the alibi memory
Saving a weighing operation in the alibi memory
The alibi memory allows you to store the weight values transmitted to the computer for further processing and/or data integration.
The stored values can then be retrieved from the PC port or directly on the display of the transmitter for later checking.
A weighing operation is stored after receiving the
PID
serial command (see
“Serial commands” page 57
) or after pressing the key.
The transmitter transmits on the PC port the gross weight, the tare and an ID code that uniquely identifies the weighing. The ID has the
following format:
• rewrite number: 5-digit number (from 00000 to 00255) indicating the number of complete rewrites;
• weighing number: 6-digit number (from 000000 to 131072) indicating the weighing number in the current rewrite.
Each time it is saved, the weighing number is increased by 1; when it reaches the value 131072, it starts again from 000000 and the
rewrite number is increased by 1.
Example
If the weighing that has been saved is as follows:
PIDST,1, 1.000kg, 1.000kg,00126-131072
The next one will be:
PIDST,1, 1.000kg, 1.000kg,00127-000000
A weighing operation can only be saved if the weight ≥ 0, stable and valid (not underloaded or overloaded).
To store the weighing operation by key, the function must be active (see
“Reactivating printing” on page 53
).
In addition, if the transmitter is approved, the weight must exceed 20 divisions.
If these conditions are not met:
• the response to the PID command will have “NO” instead of the ID (
PIDST,1, 1.000kg, 1.000kg,NO
);
• there is no transmission when the key is pressed.