8
5. Various sizes of BGA alloy nozzles, which can be adjusted 360 degree for easily installation and
replacement.
6.
Three temperature areas can independently heat and they are multiple temperature control,
which can ensure best integration of different temperature areas. Heating temperature, time,
slope, cooling and vacuum can all be set in the human-machine interface.
7.
There are 8 stage temperature controls up and down. Massive storage of temperature curves
which are accessible at any time according to different BGA. Curve analysis, setting and
adjustment are also accessible via touch screen. Three heating areas adopt independent PID
calculation to control heating process to enable more accurate temperature.
8. It uses high power cross-flow fan to enable fast cooling of PCB board and prevent PCB from
deformation. There are also internal vacuum pump and external vacuum chuck, which can help
to fetch the BGA chip
；
9.
Collocating with sound control "early warning" function. It can warn workers to make some
relative preparation 5-10 seconds before the completion of uninstalling or welding. Cooling
system will start after vertical wind stopped heating. When the temperature drops to normal
temperature, the cooling process will stop automatically, so that the machine will not be aging
after temperature heated up.
10.
It use rocker controller for controlling the upper heater go up and down freely, and it also has the
function for zooming the picture.
CE approved, equipped with emergency stop switch and automatic power-off protection device when
emergency happens.
E Setting
(A.)Introduction of the touch screen operation
1 Switch on the power, the touch screen will show as follow: choose the user’s
language
