16
indicates that the machine goes into constant state, three group of heating output of the
whole machine will operate with current temperature, until click “
keep on
” , the
machine come back the normal heating state
setting has been done with all parameters set when the machine leaved
the factory, users have no need to modify
This machine can log monitor rotate speed of cooling fan against hot wind from up
and down, and you can also set the lowest rotate speed When it appears that fan stops
or fan rotate speed lower than it is set during heating, when the upper and bottom
temperature higher than 300 degrees, the system will stop heating, system can set
advance roar automatically
say 10s, when it is 10s
before the machine finishing heating, the buzzer will roar
The complete machine switch to cooling state, and display relevant fault point tips on
the Lord working interface, can help workers judge the fault point rapidly
When you click
the following picture will appear
Picture 11
18.
,
