4
6.Prohibit Placing heavy objects on top of the touch screen
7.Without the influence of air-conditioners, heaters and fans
8.Reserved for 30cm to move and rotate around the upper for the back of rework
station
（
B
）
Power supply
INPUT :220AV±10% 50/60HZ
(C).Safety Precautions
1.Do not use fans or other devices directly to the repair station hair when it works,
otherwise it will lead to negative differential heating plate surface , burn the workpiece
2.When the machine is on working, high-temperature heating zone can not be any
direct contact with the object , it may cause fire or explosion ,and the PCB workpiece
should be placed on the PCB support shelves
3.Do not shake rework station , and move gently
4.Do not touch the high fever area , otherwise you will burned
5.When turned on, do not use the flammable spray , liquid or flammable gas near
the repair station
6.Do not try to modify rework station , otherwise it will cause fire or electric
shock
7.Electrical box has the high-voltage components , do not attempt to disassemble
8.If the metal objects or liquids fall into the repair station when it works ,
immediately disconnect the power , unplug the power cord until the machine to cool
down , then completely remove litter , dirt ; if dirt left ,there is odor when reboot
9.When abnormal heating or smoking, immediately disconnect the power , and
inform the technical service to repair It needs to disconnect the wires between the
electrical boxes and machine parts, and have to hold the plug, otherwise it leads to
poor contact, and does not work
10.Note that the repair station not to press or run over other electrical equipment
or power lines or communication cable , and it may cause device malfunction or cause
fire or electric shock
11.Before use the rework station, you must read this manual carefully
(A)Structure
