14 www.dimplex.com
Operation
Manual Controls
The following instructions will
cover the operation of the manual
controls installed with the receiver
board contained with this kit (BF
unit installations). For the opera-
tion of manual controls for other
installations (BLF34, BLF50 and
BLF74), please consult your
Owner's Manual for those specific
models.The fireplace can be con
-
trolled with switches located on
the receiver as shown in Figure 19.
!
NOTE:
Firebox must have the
Main On/Off and mode selector
switch in the full on position for
all features to work properly.
A. On Button
Pressing this button toggles
sequentially through the three
levels of the fireplace. Pressing
once activates Level 1 - flame
effect only, twice activates Level 2
- flame effect and Purifire™, three
times activates Level 3 - flame
effect, Purifire™ and heat.
B. Off Button
Pressing this button at any time
will shut the unit off.
C. Manual Selection Switch
Switches the operation of the
fireplace between the different
modes of the fireplace:
•
OFF (center): Makes the unit
inoperable.
•
MANUAL (top): All functions
of the fireplace are controlled
by the On and Off buttons as
described above (A, B).
•
REMOTE (bottom): All func-
tions of the fireplace are
controlled by the Wall Switch
Remote Control.
D. LED Indicators
Depicts which of the three (3)
levels the fireplace is currently
operating at: Level 1 - flame effect
only; Level 2 - flame effect and
Purifire™; Level 3 - Flame effect,
Purifire™ and heat.
!
NOTE:
The third LED (Level 3)
on receiver board will always
be illuminated when the Man-
ual Selection Switch is set to
REMOTE. The only time that
Figure 19
A
B
C
D
