background image

18  www.dimplex.com

 

Warranty

This Dimplex Wall Switch Remote 

Control is warranted against defects in 

workmanship and materials for two years 

from date of sale. This warranty does not 

apply to damage from accident, misuse, 

or alteration, nor where the connected 

voltage is more that 5 % above the 

nameplate voltage, nor to equipment 

improperly installed or wired or maintained 

in violation of the instruction sheet. This 

limited warranty applies only to purchases 

made in any province of Canada except 

for Yukon Territory, Nunavut, or Northwest 

Territories or in any of the 50 States of 

the USA (and the District of Columbia) 

except for Hawaii and Alaska. This limited 

warranty applies to the original purchaser 

of the product only and is not transferable. 

No other written or oral warranty 

applies. No employee, agent, dealer or 

other person is authorized to give any 

warranties on behalf of Dimplex. The 

customer shall be responsible for all costs 

incurred in the removal or reinstallation 

and shipping of the product for repairs. 

Within the limitations of this warranty, 

inoperative units shall be returned to 

the nearest Dimplex authorized service 

center, and we shall repair or replace, at 

our option, at no charge to you with return 

freight paid be Dimplex. It is agreed that 

such repair or replacement is the exclusive 

remedy available from Dimplex and that 
DIMPLEX IS NOT RESPONSIBLE FOR 

DAMAGES OF ANY KIND, INCLUDING 

INCIDENTAL AND CONSEQUENTIAL 

DAMAGE. Some States do not allow the 

exclusion or limitation of consequential 

damages, so the above exclusion or 

limitation may not apply to you. This 

warranty gives you specific legal rights 

and you may also have other rights which 

vary from state to state.

© 2015 Dimplex North America Limited

Dimplex North America Limited

1367 Industrial Road

Cambridge ON 

Canada N1R 7G8

Содержание WRCPF-KIT



















Отзывы: