Dimplex HPK 200S, Инструкция по установке и эксплуатации

Страница: 16 / 36

EN-6
English
11
11 Device information
1 Type and order code
HPK 200S
2 Design
2.1 Model Hydraulic tower with dual differential pressureless manifold
2.2 Protection type according to EN 60529 IP 20
2.3 Installation location Indoors
3 Technical data
3.1 Heat generation External
3.2 Heat consumer
Unmixed heating circuit with electronic circulating pump Yes
Mixed heating circuit with electronic circulating pump
Optionally available
1
1. Optionally, the hydraulic module can be expanded by a heating circuit with three-way mixer. The components required for this setup are available as an expansion set.
Domestic hot water preparation (adjacent tank)
Optionally available
2
2. The standard equipment of the hydraulic module contains a pump adapter (inside micrometer 180 mm; 1-1/2") as well as shut-offs for the subsequent installation of a hot water
charge pump for an adjacent hot water tank.
3.3 Buffer tank litres 210
3.4 Diaphragm expansion vessel
Volume/admission pressure
litres / bar
24 / 1,5
Connection for additional expansion vessel 1" external thread
3.5 Start-to-leak pressure safety valve bar 2,5
3.6 max. operating overpressure bar 2,0
3.7 max. operating temperature °C 85
3.8 electrical pipe heater kW 2, 4 or 6
Immersion heater kW up to 6 (optional)
3.9 Sound power level dB(A) 37
3.10 Sound pressure level at a distance of 1 m dB(A) 31
4 Dimensions, connections and weight
4.1 Device dimensions without connections
3
H x W x L mm
3. Note that additional space is required for pipe connections, operation and maintenance.
1660 x 680 x 775
4.2 Device connections to heat generator Inch 1 1/4" external thread
4.3 Device connections to unmixed heating system Inch 1 1/4" external thread
4.4 Device connections to mixed heating system (optional) Inch 1 1/4" external thread
4.5 Device connections to domestic hot water Inch 1 1/4" external thread
4.6 Weight of the transportable unit(s) incl. Packing kg 187
5 Electrical connection
5.1 Fuse protection control voltage 230 V [AT] 10
5.2 Fuse protection load voltage (2nd heat generator 6 kW) 230 V / 400 V [A] 32 / 16
6 Complies with the European safety regulations
4
4. See CE declaration of conformity
7 Additional model features
7.1 Water in device protected against freezing
5
5. The heat circulating pump and the heat pump controller must always be ready for operation.
Yes
7.2 Regulator internal/external Internal