Troubleshooting
ISOFLOW application – User manual for XeedSystem v1.6
|
33
9.
Troubleshooting
At system start if the system is changed
(missing or new devices are detected)
the System Overview screen can be
seen with a red
"System is changed"
label.
System changes can be also detected
by pressing the refresh button on the
Settings > System Overview screen
.
For more information about the
system changes and problems
press the Error list button.
A simple troubleshoot process is helping
the oprerator to make the changed
system usable again.
To start troubleshoot press the
next button.
On the troubleshoot screen the operator
can choose from the following options:
•
Modify the existing system setup
if
the system has missing or replaced
devices.
•
Or create a new system setup for
intentionally changed system.
Note:
if the system is extended by added
new devices (modules and sensors),
then the create new system is the only
option.
For more information to choose the
correct option for the situation, check
the HELP by pressing the HELP button.
