System installation
ISOFLOW application – User manual for XeedSystem v1.6
|
11
4.4
Seed settings
The installation’s third step.
On the seed settings screen, the
following seed related options can be
set:
Seed type
Select the applied seed type.
(For example: wheat).
Thousand grain weight
Define the weight of a thousand
seed of the applied seed.
Expected rate
Define the expected rate of the
applied seed.
Blockage detection sensitivity
Defines
the
sensitivity
of
blockage detection. How sensitive
should the system be in case of
blockages.
Press the Enter button
to
access to the seed alarms
settings.
By pressing the next button,
the
system
installation
continues with the next step.
By pressing the back button,
the application goes back to
the previous step of the
system installation.
Setting the seed type properly is very important for blockage detection and seed
counting.
If the applied seed type is not in the list, select the most suitable size for the most
accurate blockage detection.
NOTE
The Blockage sensitivity has five predefined values. The Medium (default) option is a
good choice in the most situation, however sometimes it may require using another
option to reach the best performance. (Depends on the machine parameters, seed
quality, litter, deviation of seed sizes etc.)
NOTE
