Editing Drill Data
52
DigiTrak
®
F5
®
SST
®
Operator’s Manual
To add a drill plan point to the middle of the list:
1. Select the plan point prior to where the new point is to be inserted (click on the plan point in the
data list or on the drill plan graph).
2. Right-click on the highlighted point in the list and select Insert. A new plan point will display in the
data table and on the chart with default depth, relative elevation, and course deviation values.
3. Edit the drill plan data values, if necessary.
Editing Drill Plan Data Points
To edit an existing drill plan point:
1. Select the plan point to be edited (click on the plan point in the data list or on the drill plan graph).
2. Right-click on the highlighted point in the data list and select Edit or double-click on the plan point
in the list or on the drill plan graph to open the Edit Drill Plan Data dialog box.
Edit Drill Plan Data Dialog Box
3. Modify the data as desired in the dialog box.
4. Click on OK to save your changes or Cancel to close without saving.
Deleting Drill Plan Data Points
To delete a drill plan data point from the list and chart:
1. Select the plan point to be removed (click on the plan point in the data list or on the drill plan
graph).
2. Right-click on the highlighted point in the list and select Delete. The plan point will be deleted and
the graph will adjust to connect the data points before and after the one that was deleted.
