Operating Instructions
DigiTrak
®
F5
®
SST
®
Operator’s Manual
25
To stop the roll offset function or change the roll offset value, push the right arrow button when at the
steering screen to open the popup menu shown below. Toggle right to highlight the stop or set option,
and then press the execute button.
SST Remote Popup Menu for Stopping or Changing Roll Offset
If the stop option is selected, the roll offset function will be turned off and the value of the roll shown on
the remote display will be that of the SST transmitter. If the set option is selected, the roll offset function
will be enabled with the roll offset value shown.
12. Set Roll Offset on Receiver (if needed)
If you have set the roll offset function on the remote, then you must next set and
enable the function on the receiver. First, select the roll offset option from the settings
menu on the receiver. The roll offset menu will display, as shown below.
SST Receiver Roll Offset Menu
Stop option
Set option
Disable roll offset
Exit (returns to
settings menu)
Set and enable
roll offset (shown
highlighted)
Roll Offset
Option
