background image

Software Instructions

 

 

48 

DigiTrak

®

 F5

®

 SST

®

 

Operator’s Manual

 

E-mailing Report to Customer Who Does  
Not Have DigiTrak LWD software 

The  DigiTrak  LWD  software  is  able  to  generate  a  printed  report  or  an  electronic  copy  of  your  file,  as 
discussed above under “Printing and Previewing Project Files.” In addition, electronic project files can be 
sent to and opened by anyone who has the DigiTrak LWD software. 

If you want to send an electronic copy  to a customer who does not have the LWD software, we suggest 
you use a document-generating printer driver to create a PDF file using any of the following: 

  PrimoPDF 

– This free software is available for download online at www.primopdf.com. With this 

software  installed,  you  can  print  the  report  to  PrimoPDF  instead  of  your  printer  and  save  the 
report  as  a  PDF  file.  This  file  can  then  be  attached  to  an  e-mail  message.  Please  refer  to 
PrimoPDF for instructions in the use of this product.  

  Bullzip PDF Printer 

– This free software is available for download online at www.bullzip.com. With 

this  software  installed,  you  can  print  the  report  to  Bullzip  PDF  Printer  and  save  the  report  as  a 
PDF  file.  This  file  can  then  be  attached  to  an  e-mail  message.  Please  refer  to  Bullzip  for 
instructions in the use of this product.  

  Microsoft  XPS  Printer 

–  Microsoft  has  generated  a  nonstandard  encapsulated  postscript  format 

called  *.xps.  It  is  a  standard  Windows  component  and  will  probably  appear  in  your  printer  list. 
Only  Microsoft Internet  Explorer can  present  this document type  without  a translator. If IE is not 
your  default  web  browser,  then  you  or  your  customer  may  not  be  able  to  view  this  file  type. 
Please  refer  to  http://windows.microsoft.com/en-US/windows-vista/Print-to-the-Microsoft-XPS-
Document-Writer for instructions on use with your specific operating system.  

Additional information can be found at the website: help.digitrak.com  

Once you have a document writer installed: 

1.  From the 

File

 menu or the toolbar, select the print option to open the Print dialog box. 

2.  Under  Printer  at  the  top,  use  the  pull-down  menu  to  select  your  PDF  writer  or  Microsoft  XPS 

Document Writer. 

3.  Click  on  the  Properties  button  to  open  the  properties  dialog  box,  and  then  select  portrait  or 

landscape orientation (landscape is recommended).  

4.  Click on OK to save the orientation and close the properties dialog box.  
5.  Click on OK to save the file as a *.pdf or *.xps file type. The Save As dialog box will appear. 
6.  Input the name for your file in the file name text box.  
7.  Choose the location/folder where you want to save the file.  
8.  Click on OK to save the file.  
9.  Attach  the  saved  PDF  or  XPS  file  to  your  e-mail  message.  The  customer  can  view  the  file  in  a 

PDF  compatible  viewer  such  as  Adobe  Acrobat  or  a  Microsoft  XPS  compatible  viewer  such  as 
Internet Explorer.  

As an alternative to e-mailing a PDF or XPS file, the printed document can be scanned and attached to 
an e-mail message. 

 

Содержание F5 SST



































































Отзывы: