manualshive.com logo in svg

DigiTech GeNetX BNX3, Руководство пользователя

Поделиться
Скачать
DigiTech GeNetX BNX3 Скачать руководство пользователя страница 81

Trouble Shooting Guide

76

Appendix

PROBLEM

SOLUTIONS

Recorded tracks cannot be heard on playback.

Check analog output configuration in Utilty section.  Set this to 
MONO or STEREO.

Verify recorded tracks are lit GREEN during playback.  This applies to 
looped tracks as well.

Unable to hear track recorded from MIC input.

Check output mode in Utility.
Check MIC input level.
Check SETUP to route MIC to recorder.

Cannot change record quality from CD or LP or EP.

Only one recorder quality for all tracks is possible per song.  Record mode of 
first track determines mode for subsequent tracks.

I can’t access internal songs recorded on the BNX3.

Remove Smart Media Card.

Why can’t I select Re-Amp track as record input?

Re-Amp is not available unless previous tracks have been recorded.

Verify Stereo Record is set to OF

Cannot Merge tracks.

Tracks that are lit Green will be merged to Tracks that are lit Yellow.  Merge 
cannot be Undone.  Only up to 2 tracks can be merged (to yellow) at a time.
Looped tracks cannot be merged.

FS300/GNX FC footswitch not functioning properly.

Verify that a TRS stereo cable is being used.

Expression pedal will not respond properly.

Re-calibrate the Expression Pedal in the Utility menu.

Why can’t I access Factory presets with footswitches in Bank Mode?

In Bank Mode only User programs are accessible by footswitch.  Use Data 
Wheel to access Factory presets.

Wah won’t engage easily.

Adjust V-Switch threshold in Utility section.

Turn Wah on for current preset in Edit Mode.

Содержание GeNetX BNX3



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды