manualshive.com logo in svg

DigiTech GeNetX BNX3, Руководство пользователя

Поделиться
Скачать
DigiTech GeNetX BNX3 Скачать руководство пользователя страница 75

1. Press the 

UTILITY

button.The Utility button’s LED lights.

2. Using the 

MODE

or 

DRUMS

buttons, scroll to the left or right until 

digi  lvl

is displayed. The

red numeric display reflects the current Digital Level.

3. Rotate the 

DATA WHEEL

to increase or decrease the amount of Digital Level boost needed. Range

is from 1-20.

4. Press 

EXIT

to return to the BNX3 presets.

Digital Output Configuration

The BNX3’s S/PDIF digital output has several combinations of signal routing possibilities for recording and
performance situations. As with the analog outputs, the BNX3’s digital outputs can be independently
configured for more flexibility when using both analog and digital outputs simultaneously. The different
digital output configurations are:

bass+rec

(both BNX3 bass processing and recorder outputs are

mixed in stereo),

bass dry

(taps the bass signal directly off the input),

bass amp

(taps the bass signal

off just after the amp modeling and noise gate),

recorder

(only the BNX3’s recorder output is sent to

the digital output).

When using 

bass+rec

, both the BNX3’s bass processing and the recorder stereo outputs are mixed

together at the digital output.

bass dry

and 

bass amp

configurations are DigiTech’s exclusive Dry

Track™ features.

bass dry

taps the bass signal immediately off the input before it runs through the

BNX3’s processing. This lets you send an unprocessed bass signal out the digital output while still
monitoring the effects processing through the analog and headphone outputs. You can then bring the
signal back into the BNX3’s analog input and hear the same dry bass signal run through each of the
presets.

bass amp

taps the signal off just after the noise gate but gives you all the amp and cabinet

modeling without the Chorus/Mod, Delay, or Reverb effects processing.

recorder

is used when only the

BNX3’s recorder output is to be sent to the digital output. If you have a live mixer with digital input
capability, you can use this configuration in conjunction with the 

ster bass

analog output configuration.

Using this combination, the analog outputs send bass processing to an external amplifier setup while the
digital output sends recorder playback to the digital input of the mixer. This gives you the best of both
worlds when using the BNX3’s bass processing and recorder live, with high fidelity recorder output
through the mixer and the bass processing through an amplifier at the same time.

To change the BNX3’s digital output configuration, follow these steps:
1. Press the 

UTILITY

button. The Utility button’s LED lights.

2. Press the 

MODE

or 

DRUMS

button, to scroll to the left or right until 

digi out

is displayed (Digital

Output configuration setup menu). The display begins flashing between 

digi out

and the selected

digital output configuration. Note:

bass+rec

is the default digital output configuration set from the

factory.

3. Rotate the 

DATA WHEEL

to change the output configuration.

4. Press the 

EXIT 

button to exit.

70

Other Functions

Содержание GeNetX BNX3



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды